My Image

  • Trade & Volume Pricing Available

    Bohler Flux Cored - Avesta FCW 2507/P100-PW NOR 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, super duplex stainless
    Classification: E2594T1/4


    Rutile flux-cored wire of T 25 9 4 N LP / E2594T1 type designed for welding ferritic-austenitic super duplex steel and equivalent steel grades such as 1.4410 / UNS S32570 and 1.4501 / UNS S32760.

    Can also be used for joints between super duplex grades and austenitic stainless steels or carbon steels. Super duplex steels are particularly popular for desalination, pulp & paper, flue gas desulphurization and seawater systems.

    Developed to fulfil severe requirements, such as those in NORSOK M-601 and similar standards. Properties of the weld metal match those of the parent metal, offering high tensile strength and toughness as well as excellent resistance to stress corrosion cracking and localized corrosion in chloride-containing environments.

    Meet the corrosion test requirements per ASTM G 48 Methods A, B and E (40°C). Overalloyed in nickel to promote austenite formation. Ferrite measured with FeritScope FMP30 45 – 51 FN. Designed for all-round welding and can be used in all positions without changing the parameter settings.

    The weldability is excellent in the vertical-up and overhead welding positions. The operating temperature range is –50°C to 220°C.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FCW 2205-PW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, duplex stainless
    Classification: E2209LT-1-4

    Rutile flux-cored wire of T 22 9 3 N L P / E2209T1 type. Primarily designed for welding 22Cr duplex stainless steels such as 1.4462 / UNS S32205 and S31803 used in offshore, shipyards, chemical tankers, chemical/ petrochemical, pulp & paper, etc. Avesta FCW 2205-PW (FOXcore 2209-T1) has a stronger arc and a faster slag compared to Avesta FCW-2D 2205 (FOXcore 2209-T0).

    It is designed for all-round welding and can be used in all positions without changing the parameter settings. The weldability is excellent in the vertical-up and overhead welding positions.

    Very good resistance to pitting and stress corrosion cracking in chloride-containing environments. Meets the corrosion test requirements per ASTM G48 Methods A, B and E (25°C).

    Over-alloyed in nickel to promote austenite formation. Ferrite measured with FeritScope FMP30 35 – 41 FN.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FCW309L-PW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless, special applications 
    Classification: E309LT-1-4

    Austenitic stainless steel flux-cored wire of T 23 12 L P / E309LT1 type, primarily intended for surfacing low-alloyed steels and for dissimilar welds between mild steel and stainless steels.

    Ferrite measured with FeritScope FMP30 14 – 22 FN. Corrosion resistance superior to T 19 9 L / E308L fillers. When used for overlay welding on mild steel a corrosion resistance equivalent to that of 1.4301 / 304 is obtained already in the first layer.

    Avesta FCW 309L-PW (FOXcore 309L-T1) has a stronger arc and a faster freezing slag compared Avesta FCW-2D 309L (FOXcore 309L-T0 DG). It is designed for all-round welding and can be used in all positions without changing the parameter settings.

    Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions.

    Maximum application temperature 300°C. The scaling temperature is approximately 1000°C in air.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FCW316L/SKR-PW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E316LT-1/4

    Rutile flux-cored wire of T 19 12 3 L P / E316LT1 type designed for welding 1.4404, 1.4432 / 316L type stainless steels with excellent resistance to general, pitting and intergranular corrosion in chloride-containing environments.

    Intended for severe service conditions, e.g. in dilute hot acids. Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4571 / 316Ti for service temperatures not exceeding 400°C.

    For higher temperatures, a niobium-stabilized consumable such as BÖHLER SAS 4 PW-FD (FOXcore 318-T1) is required. The scaling temperature is approximately 850°C in air.

    Avesta FCW 316L/SKR-PW has a stronger arc and a faster freezing slag as compared to Avesta FCW-2D 316L/SKR (FOXcore 316L-T0 DG). It is designed for all-round welding and can be used in all positions without changing the parameter settings.

    Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions.

    For flat and horizontal welding positions, Avesta FCW-2D 316L/SKR (FOXcore 316L-T0 DG) may be preferred. 

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FCW308L/MVR-PW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E308LT1-4

    Rutile flux-cored wire of T 19 9 L P / E308LT1 type designed for welding 1.4307 / 304L type stainless steels with good corrosion resistance under fairly severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids.

    Also suitable for welding steels that are stabilized with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347 in cases where the construction will be operating at temperatures below 400°C. For higher temperatures, a niobium-stabilized wire such as BÖHLER SAS 2 PW-FD (FOXcore 347- T1) is required.
    The scaling temperature is approximately 850°C in air.

    Avesta FCW 308L/MVR-PW has a stronger arc and a faster freezing slag compared to Avesta FCW-2D 308L/MVR (FOXcore 308L-T0 DG).

    It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation.

    Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FC 316L T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E316LT1-1

    Avesta FC 316L-T1 is designed for welding austenitic stainless steel type 17Cr 12Ni 2.5Mo or similar.

    This filler metal is also suitable for welding titanium and niobium stabilised steels such as ASTM 316Ti in case where the construction will be operating at temperatures below 400oC.

    For higher temperatures, niobium stabilised consumable such as Avesta 347/MVNb is required.

    Avesta FC 316L-T1 provides excellent usability with stable arc, less spattering, good bead appearance, better slag removal, and it is designed for all-round welding and can be used in all positions without changing parameter settings.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FC 309L T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless, special applications
    Classification: E309LT1-1

    Avesta FC 309L-T1 is a high-alloy 23Cr 13Ni wire primarily intended for surfacing on low-alloy steels and for dissimilar welds between mild steel and stainless steel.

    It provides excellent usability with stable arc, less spattering, good bead appearance, and better slag removal.

    Avesta FC 309L-T1 is designed for all-round welding and can be used in all positions without changing parameter settings.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Avesta FC 308L T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E308LT1-1

    Avesta FC 308L-T1 is designed for welding austenitic stainless steel type 19Cr 10Ni or similar.

    This filler metal is also suitable for welding titanium and niobium stabilised steels such as ASTM 321 and ASTM 347 in case where the construction will be operating at temperatures below 400oC.

    For higher temperatures, niobium stabilised consumable such as Avesta 347/MVNb is required. 

    Avesta FC 308L-T1 provides excellent usability with stable arc, less spattering, good bead appearance, better slag removal, and it is designed for all-round welding and can be used in all positions without changing parameter settings.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Diamondspark X70 RC-Pipe FCAW 1.2mm 15Kg

    My Image

    Flux cored wire, seamless, for automatic pipeline welding, rutile type - Classification: E91T-1 M H4

    Seamless rutile, Nickel-Manganese alloyed, flux cored wire for single- or multilayer welding of carbon, carbon-manganese steels and high strength steels with Ar-CO2 shielding gas.

    Main features: excellent weldability in all positions, excellent bead appearance, very low spatter losses, fast freezing and easy to remove slag.

    The exceptional mechanical properties of this wire even at low temperatures as well as the low content of diffusible hydrogen make it especially suitable for pipeline applications.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Foxcore 308L-T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E308LT1-4

    Rutile flux-cored wire of T 19 9 L P / E308LT1 type designed for welding 1.4307 / 304L type stainless steels with good corrosion resistance under moderately severe conditions, e.g. in oxidizing acids and cold or dilute reducing acids.

    Also suitable for welding steels that are stabilised with titanium or niobium, such as 1.4541 / 321, 1.4878 / 321H and 1.4550 / 347, but for service temperatures above 350°C, a niobium-stabilised wire such as FOXcore 347-T1 would be required. The scaling temperature is approximately 850°C in air. FOXcore 308L-T1 has a stronger arc and a faster freezing slag compared to FOXcore 308L-T0 DG.

    It is designed for all-round welding and can be used in all positions without changing the parameter settings.

    Very good slag detachability and almost no spatter formation. Due to the fast freezing rutile slag, the weldability is excellent also in the vertical up and overhead positions.

    The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion.

    Suitable for service temperatures from –196°C to 350°C. For flat and horizontal welding positions, FOXcore 308L-T0 or FOXcore 308L-T0 DG may be preferred.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Foxcore 309L-T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless, special applications
    Classification: E309LT1-4

    Rutile flux-cored wire of T 23 12 L P / E309LT1 type, primarily intended for surfacing low-alloyed steels and for dissimilar welds between mild steel and stainless steels. Ferrite measured with FeritScope FMP30 14 – 22 FN.

    Corrosion resistance superior to T 19 9 L / E308L fillers. When used for overlay welding on mild steel a corrosion resistance equivalent to that of 1.4301 / 304 is obtained already in the first layer. FOXcore 309LT1 has a stronger arc and a faster freezing slag compared to FOXcore 309L-T0 DG.

    The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion.

    It is designed for all-round welding and can be used in all positions without changing the parameter settings.

    Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions.

    Very good slag detachability and almost no spatter formation. Suitable for service temperatures from –60°C to 300°C. The scaling temperature is approximately 1000°C in air.

    For flat and horizontal welding positions, FOXcore 309L-T0 DG may be preferred.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Foxcore 316L-T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless
    Classification: E316LT1-4

    Rutile flux-cored wire of T 19 12 3 L P / E316LT1 type designed for welding 1.4404, 1.4432 / 316L type stainless steels with good resistance to general, pitting and intergranular corrosion in chloride containing environments.

    Intended for severe service conditions, e.g. in dilute hot acids. Also suitable for welding steels that are stabilised with titanium or niobium, such as 1.4571 / 316Ti for service temperatures not exceeding 400°C.

    For higher temperatures a niobium-stabilised consumable such as FOXcore 318-T1 is required.

    The scaling temperature is approximately 850°C in air. FOXcore 316L-T1 has a stronger arc and a faster freezing slag as compared to FOXcore 316L-T0 DG. It is designed for all-round welding and can be used in all positions without changing the parameter settings. Very good slag detachability and almost no spatter formation.

    Due to the fast freezing rutile slag, the weldability is excellent also in the vertical-up and overhead positions.

    The wide arc ensures even penetration and side-wall fusion to prevent lack of fusion. Suitable for service temperatures from –120°C to 400°C. For flat and horizontal welding positions, FOXcore 316L-T0 DG may be preferred.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Foxcore 625-T1 FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire electrode, high-alloyed, nickel-base
    Classification: ENiCrMo3T1-4

    Nickel-base rutile flux-cored wire of Ni 6225 P / NiCrMo3-T1 type for welding of nickel-base alloys with high molybdenum content, e.g. Alloy 625 and Alloy 825, as well as super austenitic stainless steels such as 254 SMO® (1.4547 / UNS S31254).

    With exceptional mechanical properties and low temperature ductility, this wire can be used for welding 9Ni-steels for cryogenic applications.

    Suitable for pressure vessel fabrication in the service temperature range from –196°C to 550°C, otherwise resistant to scaling up to 1100°C (in S-free atmosphere). Can also be used for welding of dissimilar joints including low-alloyed “hard-to-weld” steels. Meets the corrosion test requirements per ASTM G48 Methods A, B and E (50°C).

    The fast freezing slag offers excellent weldability and slag control.

    The wire is optimised to minimise risk of forming porosity in all positions.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - Nibas 70/20-FD FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, nickel-base Classification: ENiCr3T0-4

    Suitable for high-quality weld joints of nickel-base alloys, joint welding of dissimilar steels and difficult-to-weld combinations including low-temperature steels up to 5% Ni, high-temperature and creep resistant materials, scaling resistant, unalloyed and high-alloyed Cr and CrNiMo stainless steels.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER Q 71 RC FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, mild steel, rutile
    Classification: E71T-9 C H4 / M H8

    All position rutile fl ux-cored wire with fast freezing slag system. Suitable for welding with shielding gas M21 and 100% CO 2 .

    User friendly welding characteristics in all positions with one wire diameter 1.2 mm and same parameter setting.

    Excellent mechanical properties, easy slag removal, low spatter loss, smooth, finely rippled bead surface, high X-ray safety.

    For welding of unalloyed structural and fi ne-grained steels down to service temperatures of 40ºC with shielding gas M21.

    The product performs to the highest productivity with significant savings in time and economical aspects when used for positional welding.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER SAS 2 PW-FD FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, high-alloyed, austenitic stainless, stabilised
    Classification: E347LT1/4

    Rutile flux-cored wire of T 19 9 Nb P / E347T1 type for welding of stainless steels such as 1.4546 / 347.

    The corrosion resistance corresponds to that of the base material 308H, i.e. good resistance to general corrosion.

    The fast freezing slag offers excellent weldability and slag control in all positions.

    Easy handling and high deposition rate result in high productivity with excellent welding performance and very low spatter formation.

    Increased travel speeds, as well as self-releasing slag with little demand for cleaning and pickling, provide considerable savings in time and money.

    The wide arc ensures even penetration and side-wall fusion to prevent a lack of fusion. Stabilised with niobium and suitable for service temperatures from –120°C to 400°C.

    The scaling temperature is approximately 850°C in air. For flat and horizontal welding positions, BÖHLER SAS 2-FD (FOXcore 347-T0) may be preferred.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER Ti 52 T-FD FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, seamless, unalloyed, rutile type Classification: E71-T1C/T1M-H4

    Seamless rutile flux cored wire for single- or multilayer welding of Carbon, Carbon-Manganese steels and similar types of steels including fine grain steels with Argon-CO2 shielding gas or pure CO2.

    Main features: excellent weldability in all positions with high performance welding speed, very low spatter losses, good bead appearance, fast freezing and easy to remove slag.

    This wire is especially suitable for ship building, structural steel work or wherever good bead appearance is required. D1.8 Seismic Supplement approved.

    This product can be used in sour gas applications. (HIC tested acc. to NACE TM-0284).

    Test values for SSC are available upon request. Typical hydrogen value 2.5 – 3.5ml/100g weld metal.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER Ti 60 T-FD FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire, seamless, high strength, rutile type Classification: E81T-Ni1 M-H4

    Seamless rutile, Nickel alloyed, flux-cored wire for single- or multilayer welding of Carbon, CarbonManganese steels and high strength steels with Argon-CO2.

    Main features: excellent weldability in all positions, excellent bead appearance, very low spatter losses, fast freezing and easy to remove slag.

    The exceptional mechanical properties of this wire even at low temperatures (-60°C), also after post-weld heat treatment make it especially suitable for offshore applications.

    The wire is CTOD tested at -10°C. (14°F) This product can be used in sour gas applications. (HIC tested acc. to NACE TM-0284).

    Test values for SSC are available upon request.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER Ti 71-TIC FCAW 1.2mm 15Kg

    My Image

    Flux-cored wire
    Classification: E71-T1C -H8

    BOHLER Ti 71-T1C is a rutile flux cored wire with fast freezing slag.

    Excellent welding characteristics in all positions, using 100% CO2 gas. Very good mechanical properties, easy slag removability, low spatter level, smooth and well-shaped beads with X-ray-quality.

    Applicable in out of position welding, with higher productivity and less time for post weld cleaning.

    Suitable for butt and fillet welding of hulls, storage tanks, mechanical and constructional steel structure and bridge.

    For further information and best pricing - Please contact your local branch.

  • Trade & Volume Pricing Available

    Bohler Flux Cored Wire - BOHLER Ti 81 Ni-T1C FCAW 1.2mm 15Kg

    My Image

    Flux Cored Wire
    Classification: E81T1-Ni1C-H8

    BOHLER Ti 81Ni-T1C is a rutile flux cored wire and designed for all-position welding with excellent CVN impact properties in as welded condition at - 40°C.

    Excellent welding characteristics in all positions.

    Very good mechanical properties, easy slag removability, low spatter level, smooth and good weld beads with X-ray-quality. Applicable in out-of-position welding, with higher productivity and less time for post weld cleaning.

    Applicable for Single pass & multi passes weld.

    Suitable for Butt, fillet welding of 490N/mm2 class high strength steel and low temperature steel of structure such as ships, bridges, buildings and storage tanks etc..

    For further information and best pricing - Please contact your local branch.